[time-nuts] Temperature measurements
Joseph Gray
jgray at zianet.com
Mon Jul 25 03:29:24 UTC 2005
Thanks for the link. It looks like a very nice, simple and inexpensive way
to do things. However, I think the other unit will suit me better, as I can
plug it into the serial port of an existing WinXP PC and read the temps as
ASCII data. The smarts are already on the board.
----- Original Message -----
From: "Geoff" <geoff36 at gmail.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts at febo.com>
Sent: Sunday, July 24, 2005 9:20
Subject: Re: [time-nuts] Temperature measurements
> Joseph wrote:
>>I was thinking about ordering one of these:
>>http://store.qkits.com/moreinfo.cfm/vk011 for measuring temperature
>>inside, outside, and wherever. I think tracking the temperature as I take
>>long term measurements would be a good idea.
>
> If you have an old DOS PC laying around, you may like to use my FREEWARE
> application that allows using up to twenty DS18S20 temperature sensors:
>
> http://www.geocities.com/kiwi_36_nz/tlog/mlog.htm
>
> Regards, Kiwi Geoff.
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
More information about the Time-nuts_lists.febo.com
mailing list