[time-nuts] Looking for HPIB commands for 5370A
John Ackermann N8UR
jra at febo.com
Thu Mar 10 23:29:52 UTC 2005
Hi Carl --
I have the book for the 5370B; not sure what differences there might be
in the command set between the A and B models (I suspect not much).
If you happen to be running Linux, I have a program written to do time
interval work with the 5370 (written in Perl and using the linux-gpib
library and drivers).
John
----
Carl Walker wrote:
> Does anyone have an electronic copy of the supported commands and
> syntax for controlling
> an HP 5370A TIC? I don't have a manual for the unit I've got.
>
> I'm in the process of trying to dial-in my 5061A and am using the
> 5370A and the Z3801 for
> that purpose. Currently I'm taking data by polling the TIC, but
> without the GPIB information
> I'm restricted to configuring the unit locally and then simply polling
> for TI data. As I get the
> Cs closer to frequency it looks like I'm going to have to take a lot
> of data to extract the Cs
> slope from all these phase wanderings from the GPS receiver.
>
> Thanks,
>
> -Carl
More information about the Time-nuts_lists.febo.com
mailing list