[time-nuts] conformal coating removal?
Chuck Harris
cfharris at erols.com
Fri Aug 25 15:23:15 UTC 2006
Usually lacquer thinner will take it right off, but
it depends on the conformal coating. Nothing will take
the urethane variety off.
-Chuck Harris
Christopher Hoover wrote:
> fellow time-nuts,
>
> there is a hard, clear conformal coating on one of the buffer/divider
> boards in my FTS 4050/S24. i wish to make some changes to the board to
> get back the 10MHz output that was removed with option /S24.
>
> to do so, first i need to get this coating off in a few areas.
>
> anyone know what this coating might be and/or how to remove it?
>
> i've tried isopropyl alchocol, acetone, and mg 435 (aka 2-propanone),
> but none seem to work very well. i was too chicken to leave any of them
> on the board for very long.
>
> -ch
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
More information about the Time-nuts_lists.febo.com
mailing list