[time-nuts] Connection Info Wiltron 610C-MS-1042 Xtal Oscillator?

[Brooke Clarke]

Hi Rex:

I can figure it out now.
Thanks very much,

Have Fun,

Brooke Clarke
http://www.PRC68.com
http://www.precisionclock.com


Rex wrote:
> On Sat, 09 Jun 2007 09:09:56 -0700, Brooke Clarke <brooke at pacific.net>
> wrote:
> 
> 
>>Hi Rex:
>>
>>Yes, although I was hoping for a precision oscillator.  There are crystals at 
>>1, 10, 50 and 100 MHz each with a trimmer cap.
>>20 Volts negative ground for power and NPN transistors. So far I haven't 
>>figured out the ground or the interconnection of all the solder posts.  Maybe 
>>some type of grounding on the outputs.
> 
> 
> Brooke,
> 
> I copied the schematic page from my microfische as best I can with the
> tools available here. Not great images but hopefully good enough for you
> to work out connections. Let me know if you have questions after
> looking. I could take another look at the docs.
> 
> Posted here:
> http://www.xertech.net/pub/wiltron/schem_L.gif
> http://www.xertech.net/pub/wiltron/schem_R.gif
> 
> 
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>