[time-nuts] New topics (was Re: He is a Time-Nut Troublemaker....)
Max Robinson
max at maxsmusicplace.com
Wed Dec 24 23:23:22 UTC 2008
>>2. Several measurement techniques require a given phase relationship
>>(e.g., quadrature) between DUT and reference. For HF frequencies (ie, 5
>>or 10 MHz) is there a *practical* phase shifter design covering 180+
>>degrees that doesn't involve switching various lengths of coax in and
>>out of the line?
There was a Hewlett Packard generator called a two phase oscillator or maybe
it was two phase function generator. I forget the model number and don't
have any way to look it up. It featured two outputs and a dial calibrated
from 0 to 359 that would adjust the phase of one output with respect to the
other. Behind the panel was a little box which I didn't try to open but
the manual revealed it to have 3 coils, two at right angles to each other
and the third one on the shaft. It operated at 5 MHz. If memory serves
correctly, they called it a variable phase transformer.
Regards.
Max. K 4 O D S.
Email: max at maxsmusicplace.com
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Music site: http://www.maxsmusicplace.com
To subscribe to the fun with tubes group send an email to,
funwithtubes-subscribe at yahoogroups.com
----- Original Message -----
From: "Joe Gwinn" <joegwinn at comcast.net>
To: <time-nuts at febo.com>
Sent: Wednesday, December 24, 2008 3:52 PM
Subject: Re: [time-nuts] New topics (was Re: He is a Time-Nut
Troublemaker....)
> At 5:05 PM +0000 12/23/08, time-nuts-request at febo.com wrote:
>>Date: Tue, 23 Dec 2008 11:40:51 -0500
>>From: John Ackermann N8UR <jra at febo.com>
>>Subject: [time-nuts] New topics (was Re: He is a Time-Nut
>> Troublemaker....)
>>To: Discussion of precise time and frequency measurement
>> <time-nuts at febo.com>
>>
>>Magnus Danielson wrote:
>>
>>> My intent is to get some stuff done in the lab during the vacation.
>>> (Desperatly trying to get some more on-topic discussions going).
>>
>>Here are two questions that have been running around my head:
>>
>>[snip]
>>2. Several measurement techniques require a given phase relationship
>>(e.g., quadrature) between DUT and reference. For HF frequencies (ie, 5
>>or 10 MHz) is there a *practical* phase shifter design covering 180+
>>degrees that doesn't involve switching various lengths of coax in and
>>out of the line?
>
> Why the aversion to coax delay lines? They are simple and reliable.
> The reason will help people to tell what alternatives would be best.
>
> Joe
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list