[time-nuts] ADEV test setup [was GPSDO TC & Damping]
Tom Van Baak
tvb at LeapSecond.com
Fri Jan 9 14:29:45 UTC 2009
> 4) The real stumbling block is obtaining a suitable reference.
> An FTS1200 or an OSA8607 may be suitable, however these are either rare
> or expensive.
> Some rubidium standards are also suitable.
Bruce,
Note that my Tbolt time constant plots were made using just a
58503B GPSDO as the reference; not something more exotic.
/tvb
More information about the Time-nuts_lists.febo.com
mailing list