[time-nuts] Stable Z38XX

[Scott Mace]

Ulrich,  I'm trying to run this against a Fury and z38xx doesn't seem to 
keep the 115200 baud setting,  it just changes back to 57600.

	Scott


On 07/11/2009 02:47 AM, Ulrich Bangert wrote:
> Hi Said,
>
> not necessary to supply you with a list: Just start the software and open
> the debug window. You will see all serial communication action. With no
> device connected just the commands will appeear one below the other. You can
> use the "window hold" option of the debug window to defeat the scrolling.
>
> There is also a second option: If you supply ME a list of commands that your
> devices understand then I can detect the device type by the answer to *IDN?
> and ask the devices just what they understand and leave everything else out.
> That is the stategy that the software already uses to cover the Z3801/5/15
> and the GCRU.
>
> Best regards
> Ulrich
>
>> -----Ursprungliche Nachricht-----
>> Von: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] Im Auftrag von SAIDJACK at aol.com
>> Gesendet: Freitag, 10. Juli 2009 20:23
>> An: time-nuts at febo.com
>> Betreff: Re: [time-nuts] Stable Z38XX
>>
>>
>> Hi Ulrich,
>>
>> any chance you could send me a list of commands you utility
>> uses as a
>> minimum command-set so I can cross-check against our
>> Fury/FireFly  GPSDO's?
>>
>> There are lots of folks on this list that have our units, and
>> it would be
>> great if we could get it up and running for our interface as
>> an alternative
>> to  GPSCon.
>>
>> Thanks,
>> Said
>>
>>
>> In a message dated 7/10/2009 07:17:31 Pacific Daylight Time,
>> df6jb at ulrich-bangert.de writes:
>>
>> Guys,
>>
>> after a lot of help coming from Australia (thank you Hal  and
>> Kit) there is
>> a
>> stable version of my Z38XX utility available. It  handles the
>> Z3801, the Z3805, the Z3815 and the GCRU.
>>
>> It is  available from the usual place. Enjoy!
>>
>> Ulrich  Bangert
>> www.ulrich-bangert.de
>> Ortholzer Weg 1
>> 27243 Gross Ippener
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>