[time-nuts] Z38XX software and HP 58503A

[ernieperes at aol.com]

Hi Stan,


I have all the older version of the Z38XX SW.

Let me know which date do you like and I can forward to you.
I did not installed yet any-one because the project not yet completed.

Rgds Ernie.



-----Original Message-----
From: Stan <swperk at earthlink.net>
To: time-nuts at febo.com
Sent: Sat, Jul 18, 2009 7:03 pm
Subject: [time-nuts] Z38XX software and HP 58503A



I have been using the Z38XX software (thanks Ulrich!) for a while now 
with
my 58503A and it's worked very well. I recently installed the update 
that
included the spelling corrections and displayed the date along with the
time, and found to my dismay that this version no longer worked with my
58503A. Later I installed the current update (20090716) with no success,
either. The software appears to be identifying the 58503A, as the 
response
to the *IDN? command is in the lower right corner of the main window, 
but
there is no other data collected or displayed. I tried GPSCon and it is
still working fine with the 58503A, so I suspect a change in the Z38XX
software itself is causing this problem. Has anyone else noticed this? 
If it
turns out that this is a problem that will not be correctable, can 
someone
point me to an archive with an older version of Z38XX? The most recent
version I used that worked was the first version with the Nixie-style 
time
display.



Thanks,
Stan

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.