[time-nuts] Jupiter GPS DO
ashley40 at aol.com
ashley40 at aol.com
Sun Feb 21 02:07:01 UTC 2010
Hi.....Just wondering if A) You received my payment, and B) if you have any idea when you might mail the chips ? I found the appropriate schematics for the 12F629's, however, as I mentioned, if you have and can program a couple of 16F688's and invoice me for them, I'd be more than happy to send you more $$ via Pay Pal.
Thanks
Ashley
Thank You
Kiss-Electronics
Ms Ashley Hall
183 N 5th Avenue
Cornelius, Oregon
97113
W7DUZ
www.kiss-electronics.com
-----Original Message-----
From: Robert Atkinson <robert8rpi at yahoo.co.uk>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Wed, Feb 17, 2010 11:49 pm
Subject: Re: [time-nuts] Jupiter GPS DO
Hi Ashley,
can supply programmed chips for you. I have a couple of Jupiters but will have
o check the Software revision.
lease conmtact me off list.
obert G8RPI.
--- On Thu, 18/2/10, ashley40 at aol.com <ashley40 at aol.com> wrote:
rom: ashley40 at aol.com <ashley40 at aol.com>
ubject: Re: [time-nuts] Jupiter GPS DO
o: peter at ni6e.com, time-nuts at febo.com
ate: Thursday, 18 February, 2010, 3:20
Hello........thank you !! I have no facilities for doing that, so maybe I can
ind someone who can do the programming with whatever gizmo is needed, if I
urnish the chips?
Thanks
Ashley
7DUZ
Thank You
iss-Electronics
s Ashley Hall
83 N 5th Avenue
ornelius, Oregon
7113
7DUZ
ww.kiss-electronics.com
-----Original Message-----
rom: Peter Putnam <pico.2008 at sbcglobal.net>
o: Discussion of precise time and frequency measurement <time-nuts at febo.com>
ent: Wed, Feb 17, 2010 7:16 pm
ubject: Re: [time-nuts] Jupiter GPS DO
shley,
You will find Microchip PIC code that does exactly what you want here:
http://www.ni6e.com/time/GPS_Valid_Fix.html
The variables are set for use with a Rockwell Jupiter chip set.
Regards,
eter
shley40 at aol.com wrote:
Hello .... I wanted to thank everyone who responded when I got on here and
hined about not knowing how to get a Jupiter GPS DO gizmo going. > I finally
id a crash course in GPS and DO's, and, even though my head hurts , I think I
ave a pretty good idea how all those pieces are scrunched together and how they
ork . (sort of).
Anyhow,
I would like to know if anyone out there in Time Nutz land has any of the
ollowing stuff they might consider selling:
Jupiter gps receivers ( V1.80 or higher), OR a Jupiter GPSDO complete gizmo,
R
The little microprocessor thing that W1 ( Mr Sullivan I think) something had
ffered a couple of years ago: it was designed to show a LED when the Jupiter
S232 data stream showed a GPS "lock" > I would like to get my hands on at least
ne of those "lock LED" gizmos. ( or the parts to build one). I did Email Mr
ullivan but so far no response. >
Thanks again for everyone's help !
Ms Ashley Hall
( W7DUZ) >
> > Thank You
Kiss-Electronics
Ms Ashley Hall
183 N 5th Avenue
Cornelius, Oregon
97113
> > W7DUZ
> > www.kiss-electronics.com
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
_______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list