[time-nuts] TADD enclosure screw sizes...

[Dave hartzell]

Thanks John.

I picked some screws up at the local hardware store.  I see what you mean
about the BNC mounting...

FYI, I had to bend the vertical nut ears a bit to be able to get the board
in, and screwed in.

I'm probably going to be operating "open lid" for a while just to see the
LED status.

Dave

On Sat, Mar 13, 2010 at 10:29 AM, John Ackermann N8UR <jra at febo.com> wrote:

> Dave, the standoffs are threaded for a 4-40 screw, but I'll tell you a
> secret -- if you use the nuts and washers on the BNC connectors, the board
> is held very securely without any need for the mounting screws; I've frankly
> never bothered with them.
>
> John
> ----
>
>