[time-nuts] 50:50 duty from a PRS10
Dave M
dgminala at mediacombb.net
Fri Jul 22 03:38:03 UTC 2011
> Hello,
>
> I have a PRS10 rubidium which gives a 1pps output. The output is a
> 10 us positive pulse.
>
> I need to convert that to a 50:50 duty cycle pulse. Still 1pps.
>
> I'm hoping for a simple circuit rather than having to use a pic.
>
> I don't mind a bit of propagation delay, but I need to preserve the
> low jitter on the rising edge, and hopefully also the falling edge.
>
> Any ideas out there
>
> Regards
>
> Steve
The simplest way that I can think of is to feed both inputs of an XOR gate
with your 1pps signal to double it to 2pps, then feed the XOR output into a
flipflop to get back to 1pps with 50% duty cycle. You might have to delay
the 1pps into one of the XOR inputs with a small RC to reliably trigger the
flipflop. Use 74HC or AC gates and the jitter should be tolerable.
Cheers,
David
dgminala at mediacombb dot net
More information about the Time-nuts_lists.febo.com
mailing list