[time-nuts] Shera PIC Firmware file
EB4APL
eb4apl at cembreros.jazztel.es
Tue Aug 28 21:20:18 UTC 2012
Hi guys,
The hex file is quite outdated. In 2009 I contacted Brook Shera in
order to get the source code as I wanted to build this controller and
wanted to change the PIC to use a Flash one and add some improvements.
His response was that he already had changed the microcontroler for a
more modern unit, a PIC 16F876A, and included a lot of improvements. He
also informed me that he was not releasing the hex or source code
anymore but he could sell me programmed PICs with the last version and
some other components like the AD1861 at least while his supply last.
He also supplied me the critical 74HC4046's and even the 24 MHz xtal
oscillator.
I also ordered a board from A&A Engineering and now I have to find the
time to build it.
So I recommend you contact with Mr Shera for the last versions of this
software. His email has changed since the mentioned QST article and in
2009 was: ebs(AT)mailaps.org
Best regards,
Ignacio, EB4APL
On 28/08/2012 7:30, WB6BNQ wrote:
> Hi Ron,
>
> My apologies, I got to typing and forgot to append the URL line; which is:
>
> http://www.rt66.com/~shera/index_fs.htm
>
> Sorry about that ! If you haven't already it is worth reading the original QST
> article which he has a link to at the bottom of the page.
>
> Bill....WB6BNQ
>
>
> Ron Ward wrote:
>
>> Hi Bill:
>> I don't see the address for Shera's web page!
>> Thanks,
>> Ron
>>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>> Behalf Of WB6BNQ
>> Sent: Monday, August 27, 2012 3:16 PM
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] Shera PIC Firmware file
>>
>> Ron,
>>
>> Here is Mr. Shera's actual web page on the topic. At the bottom you will
>> find
>> the HEX file file for the firmware.
>>
>> Don't ask as there is no published assembly listing of the firmware. Mr.
>> Shera
>> does not feel like releasing it to the general public at this time.
>>
>> Also, on that page is a link to the original article he wrote on the
>> project. So
>> it is a good page to bookmark.
>>
>> Bill....WB6BNQ
>>
>> Ron Ward wrote:
>>
>>> Hi again all:
>>>
>>> Does anyone know where I can get a copy of Shera's PIC firmware for his
>>> GPS-Based Frequency Standard?
>>>
>>>
>>>
>>> Also, what enhancements are available for the latest firmware?
>>>
>>>
>>>
>>> Thanks again,
>>>
>>> Ron
>>>
>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list