[time-nuts] Schematic capture, anyone?
Bob Camp
lists at rtty.us
Sun Feb 26 23:03:37 UTC 2012
Hi
Verifying Gerbers on a trace by trace basis for a moderately complex multi-layer design could take a very long time. If you can't trust the program to go from the screen to the Gerbers, I'd say - find a new program... A bug like that nullifies any value from schematic checking or DRC.
Bob
On Feb 26, 2012, at 5:36 PM, NeonJohn <jgd at neon-john.com> wrote:
> I use professionally. It was the best that our small company could
> afford. Here are some tips that will save you mucho grief.
>
> 1) This is the biggie. Make your own parts library. Then put any part
> that you have to create in that library. As well, put a copy of any
> standard library part in your library AFTER you've verified that the
> part, especially the footprint is valid. Then put that library under
> SubVersion or whatever version control system you use.
>
> I call my library 00johh.lbr. The "00" makes it appear first in the
> library list.
>
> 2) another biggie. Validate any part that you take from an Eagle
> library. They are recklessly careless with those parts. I've found
> silk screens on the solder side and even individual pins on the wrong
> side. I lost a board run only once because of this but it was enough to
> make me extremely paranoid.
>
> 3) LOOK AT YOUR GERBERS! It takes a pretty long while and it's tedious
> work (I print mine out on an 11X17 printer and check off every feature
> with a highlighter as I go) but it's vital. Eagle doesn't always
> produce Gerbers like the board appears on the screen. Especially if you
> get caught by #2 above.
>
> I use gerbv which is a Linux tool but I think there's a version for the
> mac's almost-unix OS.
>
> John
>
>
> On 02/26/2012 02:12 PM, Jim Hickstein wrote:
>> In case anyone is following my progress, I started with EAGLE. It works
>> fine on the Mac. I can tell it's not quite native (it even has a man(1)
>> page!), but it's no problem. One afternoon with the tutorial, and I
>> have a schematic.
>
> --
> John DeArmond
> Tellico Plains, Occupied TN
> http://www.neon-john.com <-- email from here
> http://www.johndearmond.com <-- Best damned Blog on the net
> PGP key: wwwkeys.pgp.net: BCB68D77
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list