[time-nuts] altinex switches

[paul swed]

Arthur the video equipment is 75 ohms. This is time-nuttery after all so
they do make a difference. Small.
But I will never change my 75 ohm resistors out not worth the time and
effort by the way I also use 75 ohm cable for Freq distro.
But if someone really has nothing better to do then sure change those pesky
1% resistors out. :-)
Regards
Paul
WB8TSL

On Thu, Feb 21, 2013 at 3:57 PM, Arthur Dent <golgarfrincham at yahoo.com>wrote:

>
> I haven't looked any further but the daughter boards
> in the unit have 75 ohm resistors which I'm guessing
> determines the input/output impedance of the unit.
> If that's the case it should be easy to switch it to 50
> ohms although it may not make any real difference.
>
> -Arthur
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>