[time-nuts] 10811 outer oven controller.
Bob Camp
lists at rtty.us
Tue Jul 16 16:45:03 UTC 2013
Hi
The schematic and explanation on that page pretty well show how the P2/8
shutdown pin from the CPU works on the outer oven in the Z3801.
Bob
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Ed Palmer
Sent: Tuesday, July 16, 2013 1:09 AM
To: time-nuts at febo.com
Subject: Re: [time-nuts] 10811 outer oven controller.
The schematic has been around for some time. Although it's not the
original site (which I believe is now gone), Didier has reposted the
info at:
http://www.ko4bb.com/Manuals/05%29_GPS_Timing/Z3801/Z3801A_Outer_Oven/Web_Pa
ge/Z3801A%20Outer%20Oven%20Controller.htm
If necessary, be sure to remove any carriage returns or linefeeds in the
URL.
Ed
On 7/15/2013 7:56 PM, Robert Darby wrote:
> Is anyone aware of a schematic for the oscillator on the web? I have
> downloaded the usual 10811 manuals but I've never seen a schematic or
> description of the pin-outs for the double-oven version.
>
> Bob Darby
>
> On 7/12/2013 11:38 AM, Azelio Boriani wrote:
>> Is it enough if I have a schematic to send? But first let me find it...
>>
>> On Fri, Jul 12, 2013 at 5:13 PM, Mark C. Stephens
>> <marks at non-stop.com.au> wrote:
>>> I have a spare 10811 double oven, is there a homebrew outer oven
>>> controller floating around?
>>>
>>>
>>> -Marki
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list