[time-nuts] Lucent 24361 15 Mhz

[Tom Miller]

Best to remove the front panel and take it out the front. Still, it's tight 
and will require some contortions.

Tom
WA3PZI

----- Original Message ----- 
From: "paul swed" <paulswedb at gmail.com>
To: "Time-nuts" <time-nuts at febo.com>
Sent: Sunday, November 30, 2014 9:01 PM
Subject: [time-nuts] Lucent 24361 15 Mhz


> Just started to trace out the 15 Mhz signal internal to the ref1. Top of
> board side near oven and rs422 connector are the power amplifiers and
> output on off control for the 15 Mhz. The signal comes from the bottom of
> the board. J8 is 5 Mhz.
> So will need to take the board out to trace further.
> Not looking forward to that task.
> Regards
> Paul
> WB8TSL
> _______________________________________________