[time-nuts] New Acquisition: HP-53132A
GandalfG8 at aol.com
GandalfG8 at aol.com
Sun Feb 2 09:28:06 UTC 2014
I'm not sure I'd want to go quite this far, but here's one option......
http://gerrysweeney.com/hp-53131a-hard-power-switch-modification/
Regards
Nigel
GM8PZR
In a message dated 02/02/2014 03:50:56 GMT Standard Time,
stanw1le at verizon.net writes:
Hello The Net,
I just got in the counter and the fan is always ON, even with the front
panel switch OFF.
I looked in the manual but could not find anyway to change this.
The counter has the standard internal 10 MHz reference, but I will be
using a Trimble T'bolt GPS/DO for the external reference.
The fan is part of the power supply module. I can see a possible need
for it if a premium ovenized reference is always ON.
But I do not have the premium internal reference.
Is there a way to only allow the fan to be ON, if the front panel switch
is ON ? Possibly a jumper setting ?
Are there any key strokes to determine the software version, other than
a check sum ?
I do not have the standard HP serial number, with the" vintage"
(manufacturing date code) code first.
The unit was manufactured in Korea.
Stan, W1LE on Cape Cod
ZZZZz
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list