[time-nuts] Pti OCXO...
Dave Thompson
dth854 at airmail.net
Tue Jul 8 21:14:27 UTC 2014
Some of the broadcast oscilators for TV transmitters were pricey. The oscilator manufacture wanted $980 to replace a bad unit. The transmitter manufacture wanted $1800 for the same unit.
They are not true Time Nut quality but I've used them as a reality check when trying to figure out what is drifting. It has also been used as an example of a vey low noise oscilator.
Check it out and see if it drifts to much for your precision use.
Dave T
On Jul 8, 2014, at 12:26, Dan Kemppainen <dan at irtelemetrics.com> wrote:
> Hi All,
>
> Was looking through my basement the other evening, and ran across an
> OCXO I have laying on the bench. I was wondering if any of you may have
> information regarding this unit, or have used it in the past.
>
> It's an Pti XO5009. It cam from a Harris TV transmitter exciter. I
> believe it was the main frequency reference in the whole cabinet, as
> there were no other oscillators. Just wondering if it's worth hanging on
> to for a time project, or if it's an old out dated clunker...'
>
> Also, I have a bunch of the 1KW solid state amp modules from said
> transmitter, if any one needs them! :)
>
> Thanks,
> Dan
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list