[time-nuts] Oscillator help

[gianni]

Hi Glenn
I have an older TCXO made from NDK. used as direct replacement for Toyocom. My model is 5111, size 11,4 x 9.6 mm, smd, stability +\- 2.5 ppm, EFC input.you can find the data sheet here: http://islandlabs.eu/tcxo/tcxo_5100.pdf
RegardsGianni (John)

In 04 giugno 2014, Glenn Little <glennmaillist at bellsouth.net> scritto:
> I have a board marked DMEC M1 Supply that contains a Toyocom TCO-929A oscillator.
> This probably came from some type of small aircraft navigation equipment.
> The oscillator has a date code of 8922.
> It has 4 pins and a trimming capacitor on the side.
> The frequency is 10MHz.
> From the part number I would guess that it is temperature controlled.
> A search shows nothing for this part number.
> 
> Does anyone have any further information on his oscillator as to stability, accuracy or similar?
> 
> Thanks
> Glenn
> WB4UIV
> 
> _______________________________________________
> time-nuts mailing list -- <time-nuts at febo.com>
> To unsubscribe, go to <https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> and follow the instructions there.
>