[time-nuts] HP10811-60212-B Pinouts.
Bob Stewart
bob at evoria.net
Sat Oct 11 06:33:30 UTC 2014
Hi Dan,
I found a picture that looks like your OCXO on Brooke Clarke's website. Maybe he has a schematic or pinouts for the oscillator.
http://www.prc68.com/I/Images/Z3805A07b.jpg
Bob
________________________________
From: "dan at irtelemetrics.com" <dan at irtelemetrics.com>
To: time-nuts at febo.com
Sent: Friday, October 10, 2014 6:31 PM
Subject: [time-nuts] HP10811-60212-B Pinouts.
Hi All,
I recently picked up an HP10811-60212-B oscillator. However I don't
happen to have the pinouts for this device.
There are two coax cables, and cables with 6 pin headers.
One Coax is 10Mhz, the other is EFC.
Of the two 6 pin headers, one only has 4 wires (cable labeled P3).
Colors are, BLK, RED, BLK, YEL, GRN, BLU.
The other has all six pins (cable labeled P21)
Colors are: GRY, GRY, RED, RED
I've found the schematics for some of the 60xxx parts on the usual
manual sites listed here, but not this one.
Does anyone have any pinout for this oscillator and possibly the
schematic for this thing?
Also, any idea what the coax connector model is (Maybe a source to
buy a mate???).
It's a small push on type connector. I can post a picture if necessary.
Thanks!
Dan
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list