[time-nuts] 10811 unsoldered fuse

[Luca Dal Passo]

Hi Joe,
     the part is marked as follow:

mD NK 00
6109A RU

The letter R before U, is written as it was seen in a mirror.

Bye
Luca



Il sabato 24 ottobre 2015, J. L. Trantham <jltran at att.net> ha scritto:

> Luca,
>
> Any identifying marks on the part?
>
> Thanks.
>
> Joe
>
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com <javascript:;>] On
> Behalf Of Luca Dal Passo
> Sent: Saturday, October 24, 2015 1:49 AM
> To: Discussion of precise time and frequency measurement
> Subject: [Bulk] Re: [time-nuts] 10811 unsoldered fuse
>
> Hi all,
>    i have on my desk a disassembled 10811 for service. It has a thermal
> fuse of the rectangular black type placed just above the IC. The leads are
> plugged into two very small sockets on the pcb, they are not soldered.
> Bye
> Luca
> iw2Lje
>
>
>
> Il giovedì 22 ottobre 2015, J. L. Trantham <jltran at att.net <javascript:;>>
> ha scritto:
>
> > David,
> >
> > Good to know.  Thanks for the info.  Any idea of a source for that part?
> >
> > I don't remember whether my fuse was soldered in or plugged in.
> > Whatever it was, I replaced it the same way.
> >
> > Thanks again.
> >
> > Joe
> >
> > -----Original Message-----
> > From: time-nuts [mailto:time-nuts-bounces at febo.com <javascript:;>
> <javascript:;>] On
> > Behalf Of David G. McGaw
> > Sent: Wednesday, October 21, 2015 10:02 AM
> > To: Discussion of precise time and frequency measurement
> > Subject: [Bulk] Re: [time-nuts] [Bulk] 10811 unsoldered fuse
> >
> > That probably is an original thermal cutout.  It matches ones I have
> > found when repairing 10811As.
> >
> > David
> >
> >
> > On 10/20/15 7:59 AM, J. L. Trantham wrote:
> > > Dimitri,
> > >
> > > That clearly is not the 'original' thermal fuse that I found in my
> 10811.
> > > Mine was a small, axial lead, cylindrical part.
> > >
> > > It looks like someone substituted a different part (is that a fuse
> > > or a
> > > cutoff?) and did a poor job soldering.  I think the temperature is
> > > correct though.  I'd have to look at the manual to know for sure.
> > >
> > > My 'fuse' failed and I replaced it.  All the soldering was OK on my
> unit.
> > >
> > > Joe
> > >
> > > -----Original Message-----
> > > From: time-nuts [mailto:time-nuts-bounces at febo.com <javascript:;>
> <javascript:;>]
> > > On
> > Behalf Of
> > > Dimitri.p
> > > Sent: Monday, October 19, 2015 2:32 PM
> > > To: time-nuts at febo.com <javascript:;> <javascript:;>
> > > Subject: [Bulk] [time-nuts] 10811 unsoldered fuse
> > >
> > > How common is it to find undetected missing solder on 10811 parts
> > > after all these years?
> > >
> > > Dimitri
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com <javascript:;>
> <javascript:;> To
> > unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com <javascript:;>
> <javascript:;> To
> > unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com <javascript:;>
> <javascript:;> To
> > unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com <javascript:;> To
> unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com <javascript:;>
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>