[time-nuts] algorithms and hardware for comparing clock pulses
Robert LaJeunesse
lajeunesse at mail.com
Mon Sep 21 19:13:15 UTC 2015
The Teensy 3.1 (http://www.pjrc.com/store/teensy31.html ~$20) has a Flex Timer Module that appears to allow a single counter to be captured into independent registers from independent inputs. Not sure, but PJRC tends to run the clock fast (96MHz) so relative timing resolution should be much better than 0.1 microseconds.
Bob LaJeunesse
> Sent: Monday, September 21, 2015 at 1:45 PM
> From: "Can Altineller" <altineller at gmail.com>
> To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
> Subject: [time-nuts] algorithms and hardware for comparing clock pulses
>
> Dear Time-nuts,
>
> ...
> I probably need a hardware to measure the time pulses more precisely.
> ...
> Are there any solutions to this problem?
> ...
> Best Regards,
> Can Altineller
> _______________________________________________
More information about the Time-nuts_lists.febo.com
mailing list