[time-nuts] FE-5680B Rubidium and DDS
Bryan _
bpl521 at outlook.com
Sat Sep 26 10:23:36 UTC 2015
Thanks Hal, that's interesting, will try and see how far I can get.
-=Bryan=-
> To: time-nuts at febo.com
> From: hmurray at megapathdsl.net
> Date: Fri, 25 Sep 2015 23:40:40 -0700
> CC: hmurray at megapathdsl.net
> Subject: Re: [time-nuts] FE-5680B Rubidium and DDS
>
>
> > I as well wish there was a quick way of converting it back to 10Mhz. I am
> > sure it can be done, just not sure how or where to look
>
> If the 10 MHz is visible for a second or two, there is probably a gate to
> turn it on/off. If I wanted 10 MHz, I'd open it up and trace the wire back.
> If it goes to a gate, you might be able to lift the pin for the other input
> and wire it hi/low. There is a good chance it goes to a FPGA where you can't
> get at the gate.
>
>
>
>
> --
> These are my opinions. I hate spam.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list