[time-nuts] Low cost SDR suitable for phase noise measurement?
Bob Camp
kb8tq at n1k.org
Thu Aug 11 20:13:16 UTC 2016
Hi
Just to clarify:
You are looking for a way to digitize the output(s) of the mixer(s) in a DMTD. The
“target signal” is in the 1 to 10 Hz range.
Is that correct or are you looking for something to use instead of a DMTD?
Bob
> On Aug 11, 2016, at 3:29 PM, Bob Stewart <bob at evoria.net> wrote:
>
> Hi Brooke,
> It looks like I've asked a question poorly, yet again. So, let me try again. I have this idea of combining a DMTD with an SDR. So, said that way, it looks like what I really need is a 2-channel audio SDR. And having said that, maybe what I'm looking for is an external USB sound card. Those I can find. I can probably even figure out how to convert them to DC and supply them with a disciplined oscillator, if needed.
>
> Bob
> -----------------------------------------------------------------
> AE6RV.com
>
> GFS GPSDO list:
> groups.yahoo.com/neo/groups/GFS-GPSDOs/info
>
> From: Brooke Clarke <brooke at pacific.net>
> To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
> Sent: Thursday, August 11, 2016 1:36 PM
> Subject: Re: [time-nuts] Low cost SDR suitable for phase noise measurement?
>
> Hi Bob:
>
> The SDR-IQ has a lower frequency limit of 500 Hz.
> http://www.prc68.com/I/Bats.shtml#SDRIQ
>
> There is a mod that replaces the on board 66 MHz oscillator with one locked to 10 MHz.
>
> --
> Have Fun,
>
> Brooke Clarke, N6GCE
> http://www.PRC68.com
> http://www.end2partygovernment.com/2012Issues.html
> The lesser of evils is still evil.
>
> -------- Original Message --------
>> A number of posts have appeared about Zynq SDRs on the "Shera revisited" thread. So, I'd like to ask the more general question: Are there any low cost SDRs that are suitable for measuring phase noise when coupled with a DMTD? I believe what I'm looking for is something with enough bits to work in the audio range down to DC. Yes, I could use a modified sound card, but I'm really looking for something not sound card related. My thought was to use a DMTD with a heterodyne frequency of maybe 5KHz.
>>
>> Bob -----------------------------------------------------------------
>> AE6RV.com
>>
>> GFS GPSDO list:
>> groups.yahoo.com/neo/groups/GFS-GPSDOs/info
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list