[time-nuts] 1PPS users?

[Bob Stewart]

Hi Jim,
Thanks Jim,

So, what I'm seeing so far, assuming I'm interpreting it correctly, is big budget commercial and government applications, generally clustering around time-controlled multiplexing, as well as the niche that is the space industry.  Then there's the hobbyist, such as Eric who wants to control a Fedchenko clock, or similar type of application, such as whatever sort of spread spectrum that ham radio may morph into, or perhaps the low S/N EME guys.  Any others?
Bob

      From: jimlux <jimlux at earthlink.net>
 To: time-nuts at febo.com 
 Sent: Sunday, December 18, 2016 6:56 PM
 Subject: Re: [time-nuts] 1PPS users?
   
On 12/18/16 3:16 PM, Bob Stewart wrote:
> One thing I've never really understood is who actually uses the high-quality 1PPS output from a GPSDO.  I have spent a lot of time, effort, and money on developing my GPSDO without a whole of thought to the user base.  It was just a quest for the best result I could obtain with a particular technology.  The frequency standard users was a no brainer.  Everyone who wants a frequency standard eventually understands they need to get a GPSDO, or an Rb, or a Cs.  And that's all I thought I had: a good frequency standard.  And then Tom prodded me a bit and showed me the shortcomings of what I was doing, and I did something about it.  So, if an NTP user can get his time fix directly from a noisy receiver, who actually needs a time-accurate, low jitter 1PPS pulse?

Anyone who needs to trigger events at a precise time or log the 
occurrence of an event uses the 1 pps - the serial port (or other 
interface) gives you the "at the tone the time will be" message, and the 
edge of the 1pps is the "tone".


I've got several systems flying in space (or soon to fly in space) that 
use the 1pps from GPS to calibrate their internal clocks and/or to 
provide an absolute time reference (along with the aforesaid time message).

For example, one needs to have your carrier frequency within a certain 
tolerance for communications with the ground stations: you can either 
fly a precision oscillator with an oven (big, heavy, high power) or you 
can measure a not-so-precision oscillator (small, cheap, low power) 
against a 1pps, and adjust your frequency that way.

I grant you that this is really more like *building* a GPSDO than 
*using* a GPSDO.

I've used the 1pps from a GPSDO as a common trigger to synchronize 
timing and timestamping for separate systems.



_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.