[time-nuts] Z3801A recovering

[Artek Manuals]

Joe

I am confused by the fact that it shows the unit has been in HOLDOVER 
for 496 hours if you did a fresh survey

Did you do a SYSTEM:PRESET: and GPS:POS:SURVEY:ONCE commands to initiate 
the new survey or just the survey command or ???? What software are you 
running?

I would power the unit down and let it sit for 24 hours and then do the 
two commands above.

What software are you running?

Dave
NR1DX




On 3/16/2016 7:38 PM, Joseph Gray wrote:
> As I mentioned a while back, my trusty Z3801A, which has worked well
> for several years, went into holdover some time ago and stayed there.
> Until recently, I haven't had time to look into this. About 20 days
> ago, I did power cycle it to see if that made a difference. It did
> not.
>
> In the middle of the night, last night (couldn't sleep), I decided to
> see what initiating a new survey would do. Since the unit doesn't lock
> to as many satellites as my Lucent with the newer Oncore, it took
> quite a while for the survey to finish.
>
> I just got home from work and this is what I am seeing:
>
> https://dl.dropboxusercontent.com/u/19599147/Z3801A.png
>
> The good news is that the unit no longer telling me the PPS is
> invalid. It looks like it will be another long while before it comes
> out of Recovery (assuming the PPS stays locked).
>
> I'm not the best at interpreting these graphs. At this point, should I
> be concerned abouth the spikey nature of the EFC graph, or will things
> calm down eventually? I assume that the PPS graph won't show until
> Recovery is done?
>
> If this unit loses PPS lock again, or otherwise acts up, then I would
> assume it is a hardware problem, and I'll have to put it on the bench.
>
> Joe Gray
> W5JG
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


-- 
Dave
Manuals at ArtekManuals.com
www.ArtekManuals.com

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus