[time-nuts] Fw: 5065
Tom Miller
tmiller11147 at verizon.net
Fri Mar 18 05:47:42 UTC 2016
Most of the time I have seen the MS3106 style connectors used for power on
mil spec applications.
Does this one look like it is right?
http://www.mouser.com/ProductDetail/Amphenol-Industrial/MS3106F14S-1S/?qs=sGAEpiMZZMv%2fye0hRulZR2pdaTIihrgU32yg4H0jMKs%3d
If so, you should be able to get it on the surplus market fairly cheap.
Regards,
Tom
----- Original Message -----
From: "J. L. Trantham" <jltran at att.net>
To: <KA2WEU at aol.com>; "'Discussion of precise time and frequency
measurement'" <time-nuts at febo.com>
Sent: Thursday, March 17, 2016 5:56 PM
Subject: Re: [time-nuts] Fw: 5065
> Ulrich,
>
> The connectors can be obtained reasonably inexpensively from Galco.
>
> http://www.galco.com/shop/Circular-Connectors
>
> They are a 3 pin circular connector, consisting of three parts, that are
> purchased as an 'insert', 'shell', and 'clamp', IIRC. I don't have the
> part numbers in front of me but they are the same for the 5061 Cesium
> standards.
>
> I can get you the specific part numbers if you can't find it in the
> archives.
>
> I used a spare 3 wire extension cord and just cut the end off the cord and
> installed the connector to mate with the 5065A and 5061A. I've been told
> that the wiring is different between the 5061A and some of the 5065A's but
> I've never found a 5065A that was different from my 5061A.
>
> Might want to open the unit and make sure the wiring matches the
> schematic.
>
> Good luck.
>
> Joe
>
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of KA2WEU---
> via time-nuts
> Sent: Thursday, March 17, 2016 9:30 AM
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] Fw: 5065
>
>
> The HP 5065A Rubidium Frequency Standard requires a circular 3 pin
> adapter cable that can be plugged into 115V AC outlet.
> I checked all cables I have and this particular cable is not finable.
> Can the unit set to 110/220 V
> Maybe this cable can be purchased or assembled ? ULRICH
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list