[time-nuts] How to run Lady Heather under Windows10
Orin Eman
orin.eman at gmail.com
Fri Mar 18 18:20:16 UTC 2016
If you want to argue about FTDI, please take it over here:
http://www.eevblog.com/forum/microcontrollers/ftdi-gate-2-0/
On Fri, Mar 18, 2016 at 10:36 AM, Dan Kemppainen <dan at irtelemetrics.com>
wrote:
> Hi,
>
> Sorry, I have to speak up here. This fake stuff isn't "clone" FTDI
> hardware. It is counterfeit hardware. And it uses FTDI's VID illegally.
>
> FTDI should block counterfeit hardware from using their drivers. Making
> the assumption that the counterfeit junk will work, and putting blame on
> FTDI for blocking it is unacceptable. Unfortunately, some of us trying to
> save a few bucks are ripped off by vendors selling this garbage.
>
> FTDI chip makes great hardware. Real FTDI hardware and drivers make an
> amazingly easy to use USB solution. They are extremely reliable.
>
> Dan
>
>
>
>
> On 3/18/2016 12:00 PM, time-nuts-request at febo.com wrote:
>
>> ------------------------------
>>
>> Another issue is that FTDI is back at it again with making their drivers
>> incompatible with clone FTDI chips. Their previous attempt actually
>> bricked the clone USB interface chips. Their latest driver just sends
>> garbage out the serial port. If you are using a cheap USB to serial
>> converter cable there is a very good chance it has a clone chip in it and
>> FTDI's latest driver may be up to its evil ways.
>>
>>
>>
>>
>
More information about the Time-nuts_lists.febo.com
mailing list