[time-nuts] 5372A A7 CPU board

[John Allen]

Hi Bob - I have a OCR'd service manual with schematics.  There is also one on the KO4BB site
http://www.ko4bb.com/getsimple/index.php?id=manuals

I can post mine if that one isn't sufficient.

Regards, John K1AE, Bolton, MA

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Bob Bownes
Sent: Monday, January 02, 2017 8:13 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5372A A7 CPU board

 
I have the CPU board 05372-6007 out of my 5372A this evening to replace the battery. While looking at it, I see jumpers for 64/256K and 512k/2M. 

I suspect the 64/256 is for the RAM as it is located next to the (non socketed) RAM. 

Does anyone have a schematic or listing of what all the jumpers are for?

Thanks!
Bob
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus