[time-nuts] new WWVB BPSK dev board

[Paul Bicknell]

Hi All 

There is a 60 Khz  frequency standard operating in the UK 

So do the two signals interfere with each other? 
Paul

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at lists.febo.com] On Behalf Of Tom
Van Baak
Sent: 04 December 2018 02:12
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] new WWVB BPSK dev board

At long last, a complete WWVB 60 kHz BPSK dev board is available:

https://universal-solder.ca/product/everset-es100-cob-wwvb-60khz-bpsk-receiv
er-kit-with-2-antennas/

Note it includes the antenna(s). Also has links to documentation.

It would be very nice if a bunch of time nuts around the country played with
these and reported results.

Prior to this, the only device that you could buy which used the enhanced
WWVB format was the La Crosse 404-1235UA-SS UltrAtomic clock. It was not
developer friendly, so a dev board with the Everset ES100 chip is good news.

The maker / hacker / Arduino crowd may enjoy a fresh source of accurate
time; something independent of GPS or NTP. Some technical postings about
reception quality, acquisition speed, and timing precision would be most
welcome.

/tvb


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.8048 / Virus Database: 4793/15883 - Release Date: 08/14/18
Internal Virus Database is out of date.