[time-nuts] TAPR TIC Upgrade?
djl
djl at montana.com
Thu Aug 15 03:00:23 UTC 2019
Would require a real time operating system on the Pi?
On 2019-08-14 16:16, Bob kb8tq wrote:
> Hi
>
> Could you? Sure you could.
>
> Should you? How much do you feel like rewriting all the driver
> software from scratch?
> Do you really want to rewire things to fit to the Raspberry pinout?
> That’s either a fairly
> simple PCB or a whole bunch of wires.
>
> The main benefits would be the bigger RAM on the 4B and the ethernet
> port. If you went
> crazy, you could put a display and buttons on it and have an “all in
> one” instrument.
>
> Probably easier to leave the Arduino where it is and mate up the 4B
> with the serial port
> on the Arduino.
>
> Bob
>
>> On Aug 14, 2019, at 1:28 PM, Perry Sandeen via time-nuts
>> <time-nuts at lists.febo.com> wrote:
>>
>> Yo Bubba Dudes!,
>> I've just purchased a TAPR TIC module. Now the new Raspberry Pi Model
>> B has just been released.
>> So my question is would there be any worthwhile advantage to replacing
>> the TAPR unit with the new Model 4B?
>> Regards,
>> Perrier
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
--
Dr. Don Latham AJ7LL
PO Box 404, Frenchtown, MT, 59834
VOX: 406-626-4304
More information about the Time-nuts_lists.febo.com
mailing list