[time-nuts] Ublox F9P multi-band GPS receiver

[Tom Knox]

Hopefully Jackson Labs (If possible) will offer an update of their M12M replacement that I believe currently uses M8T. I have been preparing for this inevitable evolution for a while updating all my antenna system with all band GNSS antennas, distribution amps, as well as fiber links I use to protect from possible lighting strikes. In metrology applications this should prove a big step forward using GPS as a replacement in many lab applications currently using Cesium standards when disciplining a ULPN clean-up oscillator. Cheers Tom

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Mark Sims <holrum at hotmail.com>
Sent: Sunday, January 20, 2019 3:42 PM
To: time-nuts at lists.febo.com
Subject: [time-nuts] Ublox F9P multi-band GPS receiver

Sparkfun is now selling the Ublox F9P L1/L2 GPS receiver module on a board ($219).  The F9P supports GPS/Galileo/Glonass/Beidou and tracks L1/L2 data.  It outputs carrier phase data and has survey-in and fixed position support along with RTK support (10 mm accuracy).   Looks like the F9P has 1 time pulse output.
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.