[time-nuts] Good clean-up oscillators

Bernd Neubig BNeubig at t-online.de
Fri Jan 25 18:41:42 UTC 2019


Hi all,

Sorry the URL given below was broken into two lines. In its total it must
read
https://www.axtal.com/English/Products/OscillatorModules/PhaseLockedOscillat
orModules/

To download the data sheet directly, use this link:
https://www.axtal.com/cms/docs/doc87559.pdf

Have fun
Bernd



-----Ursprüngliche Nachricht-----
Von: time-nuts [mailto:time-nuts-bounces at lists.febo.com] Im Auftrag von
Bernd Neubig
Gesendet: Freitag, 25. Januar 2019 07:45
An: 'Discussion of precise time and frequency measurement'
<time-nuts at lists.febo.com>
Betreff: Re: [time-nuts] Good clean-up oscillators

>> At least one version is available from Mouser for $85.
>>
>> And I'm sure if I wanted to order one with something slightly 
>> different, Vectron would do it.>
>
>From my previous experience (asking for a custom frequency TCXO) 
>Vectron's
business model does not include low volume or one offs. Even if they did,
they would charge NRE. Now, if you want to buy 10,000 of them, that is a
different story.

>Connor Winfield has been much more flexible to me at least, with 
>volumes in
the 50s being reasonably priced and willing to make them. They don't have
the highest performance parts though.

>Wenzel was very responsive, they could not tell me the proprietary 
>customer
specs, but provided specs for a similar part and told me a little about what
I had. Their new stuff is pretty expensive.

>That's the limit of my experience.


Hi,

I am hesitating to drop the below  information, as it may be considered as
commercial.
However several models from several companies have been mentioned in this
thread, so I would just like to complete the lsiting.

I just want to point out, that AXTAL has a neat compact clean-up OCXO, model
AXPLO10.
You can find it at the AXTAL website under
https://www.axtal.com/English/Products/OscillatorModules/PhaseLockedOscillat
orModules/
It is sold in small quantities from 1 piece and is reasonably priced and has
a lead time of 5-6 weeks.

Best regards
Bernd





-----Ursprüngliche Nachricht-----
Von: time-nuts [mailto:time-nuts-bounces at lists.febo.com] Im Auftrag von Mark
Goldberg
Gesendet: Donnerstag, 24. Januar 2019 23:16
An: Discussion of precise time and frequency measurement
<time-nuts at lists.febo.com>
Betreff: Re: [time-nuts] Good clean-up oscillators

On Thu, Jan 24, 2019 at 2:01 PM jimlux <jimlux at earthlink.net> wrote:

>
> At least one version is available from Mouser for $85.
>
> And I'm sure if I wanted to order one with something slightly 
> different, Vectron would do it.
>
>
>
>From my previous experience (asking for a custom frequency TCXO) Vectron's
business model does not include low volume or one offs. Even if they did,
they would charge NRE. Now, if you want to buy 10,000 of them, that is a
different story.

Connor Winfield has been much more flexible to me at least, with volumes in
the 50s being reasonably priced and willing to make them. They don't have
the highest performance parts though.

Wenzel was very responsive, they could not tell me the proprietary customer
specs, but provided specs for a similar part and told me a little about what
I had. Their new stuff is pretty expensive.

That's the limit of my experience.

Regards,

Mark
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list