[time-nuts] Connector help?
Martin Flynn
martin.flynn at compdecon.org
Sun Jan 27 22:54:11 UTC 2019
Hi Bob,
Antenna is a PCTEL GPS-TMG-HR-26NCM ( 26 dB gain) antenna that feeds a
Polyphaser 095-0927T-A protector using 1/2 Super-flex. The HP
095-0927T-A would be downstream of the protector with about 100 feet
of additional super-flex.
Martin
On 1/27/2019 5:17 PM, Bob kb8tq wrote:
> Hi
>
> Yes I know, this is beating a dead horse …..
>
> Since the HP splitter will knock out everything that is not right on
> top of GPS, are you
> sure you want to go that route? Yes it does depend a bit on the
> antenna. If it’s one of
> the telecom / narrowband gizmos then the splitter will not have much
> affect.
>
> I tend fo find that in a lab setting as broadband a feed as possible
> is a really good idea.
> You never really know what will pop up on the bench next.
>
> Bob
>
>> On Jan 27, 2019, at 4:17 PM, Martin Flynn
>> <martin.flynn at compdecon.org> wrote:
>>
>> Planning deployment of an 095-0927T-A GPS 1x4 antenna splitter with
>> the external power option (option 05Q) at our makerspace.
>>
>> Anyone know what the mating DC connector is?
>>
>> martin
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list