[time-nuts] Z3801A going into Holdover

[Mike Seguin]

I have a weird one with my Z3801A. Screen shot from GPSCon attached. You 
can see the EFC excursion... Maybe the oven in the OCXO is acting up???

Mike

On 6/20/2019 10:25 PM, Mark Sims wrote:
> A few months ago, my 3801A started doing this.   It was tracking sats well (several years ago I had to replace the receiver because it had lots of problems acquiring and tracking sats).    I swapped in a replacement 10811 OCXO and that fixed the problem.
> 
> Apparently the problem with the receiver not tracking sats is usually due to the oscillator on the receiver drifting out of spec.  Some of them have an adjustment screw...
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
> 

-- 

73,
Mike, N1JEZ
"A closed mouth gathers no feet"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Z3801-2.PNG
Type: image/png
Size: 49734 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20190621/acd586ca/attachment.png>