[time-nuts] DC distribution

[Bill Dailey]

Thanks to all.  I know what to do now.  Appreciated. I am finally getting to the point where I can start playing again.  Work and life has been exceptionally busy.  I am excited to build a new bench right.

Anderson it is, powerwerx and or west mountain and stick to standards.  I will search for the industrial usb hub for 5V.  

Bill Dailey

Negativity always wins the short game. But positivity wins the long game. - Gary Vaynerchuk

Don’t be easy to understand, 
Be impossible to misunderstand 
- Steve Sims

> On Oct 4, 2019, at 5:01 PM, John Ackermann N8UR <jra at febo.com> wrote:
> 
> The idea of using a short piece of thicker wire is a good one.  Thanks
> for that!
> 
>> On 10/4/19 3:17 PM, MLewis wrote:
>> With audio signals, a soldered crimp is one of the worst possible
>> connections. I wouldn't think it would be different for anything else,
>> but may go undetected until failure. If you've used the correct size of
>> crimp and used a proper crimping tool, then you've got the proper
>> pressure for a solid reliable connection. If you then solder, the heat
>> expands the crimp lessening the crimp pressure, and when it cools it's
>> no longer at the correct crimp pressure (often the wire will pull right
>> out), and with iffy wicking of solder. The worst of both methods
>> combined in one.
>> 
>> Where the wire is too thin for the crimp I have available, I've cut a
>> piece of a correct thickness wire/cable, inserted that into the crimp
>> along with the signal wire/cable, so it's crimped between them. I don't
>> know if that is the best way of handling that, but it's worked for me.
>> 
>>> On 04/10/2019 11:41 AM, John Ackermann. N8UR wrote:
>>> West Mountain is a good source for all things PowerPole, but there are
>>> a bunch of other vendors as well.  And do youself a favor -- spend $30
>>> on the three size 15/30/45 amp crimping tool.  It saves much
>>> aggravation.  But if you're using thin wire, soldering after crimping
>>> is a good precaution.
>>> 
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.