[time-nuts] Re: Tbolt

ew ewkehren at aol.com
Thu Jul 22 14:11:59 UTC 2021


If some one has a bad one how about opening it and take some pictures. Would be very informative.                                                                         Bert Kehren                                                                                                                                                                                                                                                                                       In a message dated 7/22/2021 9:59:11 AM Eastern Standard Time, time-nuts at lists.febo.com writes: 
Attached is a plot of EFC versus Frequency of a Vectron pulled from a Tbolt. EFC is + and -.   I suspect that the units are shipped with the EFC set at 0 Volt. Notice 0 Volt   Again I suspect the extra pin is  there for that purpose. Bob could tell us but may not want to comment to stay out of trouble.                                                                               Bert Kehren                                                                                                                                                                                                                                                                                                                                                    In a message dated 7/22/2021 5:01:10 AM Eastern Standard Time, time-nuts at lists.febo.com writes: 
On 22/07/2021 08:30, time-nuts-request at lists.febo.com wrote:> Message: 1> One more comment on the Vectron OCXO. My Tbolt shows a tuning voltage of +0.4 Volt and has 3.6 Hz per Volt. Assuming the OCXO was sold to Trimble with 0 V and my unit has at least 12 years on it (4380 days) aging is 3.29 E-11 per day. Not bad for an  OCXO.                                                                                                                                  Bert Kehren ------------------------------------------------------------------------ Hi. According to Lady Heather, My T'bolt sits with it's DAC at about 0.2V   I always wonder about that. From the above comment, is the DAC output (and VCXO input I guess) bipolar, as in can range +- some amount from 0V? I've not seen any schematics for them, so in honesty haven't a clue what it's likely range is, good bad or indifferent. I did email TVB direct about the possibility of sourcing another one or two of them, but as he said (and I guessed) he was swamped with responses. I use mine mainly as a frequency reference, powered on 24/7 Regards to All. Dave G8KBV (In the UK as far as I can tell.)  -- Created on and sent from a Unix like PC running and using free and open source software: _______________________________________________time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.comTo unsubscribe, go to and follow the instructions there._______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.com
To unsubscribe, go to and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list