[time-nuts] Re: Regarding HP 5065A upgrade to 10811-oscillators
Bob kb8tq
kb8tq at n1k.org
Sun Feb 13 00:58:34 UTC 2022
Hi
Again, there is no basic difference between the 10811-60109 and any
other 10811 with the same basic pinout. ( They made two packages,
one with an edge connector. Eventually they wrapped one up to put it
in a GPSDO). The only difference between the 60109 was a test and
select process back when it was made. Its been long enough since that
test for it to be totally meaningless.
Bob
> On Feb 12, 2022, at 10:15 AM, Bill Notfaded <notfaded1 at gmail.com> wrote:
>
> Good morning-
>
> My 5065A has a 10811-60109. I thought that was a standard and part of the
> reason they work so well?
>
>
> Best Regards,
>
> Bill
>
>
> On Sat, Feb 12, 2022, 7:21 AM Bob kb8tq <kb8tq at n1k.org> wrote:
>
>> Hi
>>
>> You just might find that kit will drop into a 5065 with minor
>> modsâ¦..
>>
>> Bob
>>
>>> On Feb 12, 2022, at 8:39 AM, Ke-Fong Lin <anotherlin at gmail.com> wrote:
>>>
>>> Hi everyone,
>>>
>>> Last month, I bought a 10811-60109 on ebay, it was sold with the
>>> complete oscillator assembly for a 5061A/B cesium clock.
>>> I bought it for the 10811-60109 because it has somewhat better
>>> specifications than a regular 10811.
>>>
>>> It was sold as a spare from military surplus. I've taken a quick look
>>> and it seems compatible with the older 5061A connections.
>>> I mean electronically, but I'm not so sure about the mechanical part.
>>> So it may well be such an upgrade kit, but for 5061.
>>>
>>> The PCB board doesn't seem complicated and HP basically used
>>> "jellybean" components on it.
>>> But as for the mechanical part, there would be some work to do.
>>>
>>> By the way, if somebody wants to do the upgrade for a 5061, I can
>>> basically give him/her the complete assembly.
>>> Minus the 10811-60109 of course :)
>>>
>>> Best regards,
>>>
>>> On Sat, Feb 12, 2022 at 2:10 PM Ulf Kylenfall via time-nuts
>>> <time-nuts at lists.febo.com> wrote:
>>>>
>>>>
>>>> Greetings forum.
>>>> Yes - I have performed this upgrade, having obtaineda 10811 / high
>> performance option.
>>>>
>>>> While the complete original HP kit was not available, I salvagedthe
>> 10->5 MHz divider/connection board from a 105Band re-designed the back PCB
>> with the 2 x 15pole 3.96 pitch connectors and mechanics
>>>> so that the design would be ableto fit into the 5065A chassis in a way
>> that the10811 Coarse adjustment could be reached with a longadjustment tool
>> directly.
>>>> Picture(s) available upon request.
>>>>
>>>> I have the design files (Cadence Allegro) as well asGerber/Drill files
>> for anyone that want to fabricate sucha back plate board.
>>>>
>>>> Please contact me off-list if you want thedesign files.
>>>> Best Regards
>>>> Ulf KylenfallSM6GXV
>>>>
>>>>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
>> send an email to time-nuts-leave at lists.febo.com
>>>> To unsubscribe, go to and follow the instructions there.
>>>
>>>
>>>
>>> --
>>> /* Lin Ke-Fong
>>> * anotherlin at gmail.com
>>> * I always do what I say, especially if it's something stupid.
>>> */
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
>> send an email to time-nuts-leave at lists.febo.com
>>> To unsubscribe, go to and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send
>> an email to time-nuts-leave at lists.febo.com
>> To unsubscribe, go to and follow the instructions there.
> <PXL_20220212_151505393.jpg>_______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list