[time-nuts] Dual Supplies for Low Offset Phase Noise Analyzer
Bob Martin
aphid1 at comcast.net
Wed Jul 13 21:32:01 UTC 2022
Erik,
I think you'd be better off with dual supplies and take advantage
of the amplifier PSRR. I'd put a reverse Schottky diode to ground at
the output of each regulator to ensure startup. On some regulators,
a reverse voltage on the output can inhibit regulation. There is
a lot to be said for a ground reference that is a ground plane as
opposed to some floating reference voltage when worknig with low
signal levels...
Best,
Bob
More information about the Time-nuts_lists.febo.com
mailing list