[time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK

[va2hdd at ebox.net]

I was too fast to click send, there is a graphical client for GPSD :

https://gpsd.io/xgps-sample.html

That is OK for me !

Best regards,

Claude



Le 02/03/2022 17:47, va2hdd at ebox.net a écrit :
> Hi Wilko and Bryan.
> 
> I was the one who asked and I'm also interested in getting more
> information, both on your project and using GPSD as suggested earlier.
> 
> Thank you,
> 
> Claude
> 
> 
> 
> Le 02/03/2022 14:06, Bryan _ a écrit :
>> CAUTION: This email originated from outside your organization.
>> Exercise caution when opening attachments or on clicking links from
>> unknown senders.
>> 
>> 
>> Hi Wilko:
>> 
>> 
>> 
>> I was not the OP, but I would be interested in the details of your 
>> project.
>> 
>> 
>> 
>> Cheers
>> 
>> 
>> 
>> 
>> 
>> -=Bryan=-
>> 
>> ________________________________
>> 
>> From: Wilko Bulte <wkb at xs4all.nl>
>> 
>> Sent: March 2, 2022 10:41 AM
>> 
>> To: Discussion of precise time and frequency measurement
>> <time-nuts at lists.febo.com>
>> 
>> Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK
>> 
>> 
>> 
>> hello Bryan,
>> 
>> 
>> 
>> Runnimg LH on a *Pi is feasible without any problems. I have built
>> such a setup myself, it lives in my shack and is based on a Samsung
>> UCCM GPSDO (telco surplus obtained in China). The Pi in question is an
>> OrangePi Zero running Armbian Linux. It runs an Xdesktop on top of a
>> VNCserver.  Obviously LH shows herself on that desktop ;-) This whole
>> shebang allows running the GPSDO/OrangePi combo to run headless (i.e.
>> without a display), one can use any VNCclient to check on LH via the
>> network. Laptop, tablet, even a smartphone can be used to monitor the
>> GPSDO. The OrangePi has both Wlan as well as wired Ethernet options.
>> 
>> 
>> 
>> Hope this makes sense, I did an article for Electron, the monthly of
>> the Dutch VERON ham organisation. In Dutch, for obvious reasons. But
>> can make it available if there is interest.
>> 
>> 
>> 
>> Wilko
>> 
>> PA1WBU
>> 
>> 
>> 
>>> On 2 Mar 2022, at 19:21, Bryan _ <bpl521 at outlook.com> wrote:
>> 
>>> 
>> 
>>> I have seen a project where ladyheather is run off a PI, suppose you 
>>> could just configure LH to display what you need.
>> 
>>> 
>> 
>>> -=Bryan=-
>> 
>>> 
>> 
>>> ________________________________
>> 
>>> From: va2hdd at ebox.net <va2hdd at ebox.net>
>> 
>>> Sent: March 2, 2022 9:34 AM
>> 
>>> To: Discussion of precise time and frequency measurement 
>>> <time-nuts at lists.febo.com>
>> 
>>> Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK
>> 
>>> 
>> 
>>> Hello to all members.
>> 
>>> 
>> 
>>> I want to add to my lab a Pi based display that would show a GNSS SV 
>>> map
>> 
>>> like the one attached to this message.
>> 
>>> 
>> 
>>> Any suggestions ?
>> 
>>> 
>> 
>>> Thank you !
>> 
>>> 
>> 
>>> Claude VA2 HDD
>> 
>>> 
>> 
>>> 
>> 
>>> _______________________________________________
>> 
>>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe 
>>> send an email to time-nuts-leave at lists.febo.com
>> 
>>> To unsubscribe, go to and follow the instructions there.
>> 
>> _______________________________________________
>> 
>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
>> send an email to time-nuts-leave at lists.febo.com
>> 
>> To unsubscribe, go to and follow the instructions there.
>> 
>> _______________________________________________
>> 
>> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
>> send an email to time-nuts-leave at lists.febo.com
>> 
>> To unsubscribe, go to and follow the instructions there.