[time-nuts] Re: Rubidium under construction

[Luca]

Hi Gianni,
      good job!
Did you take some special care about the EFC voltage stability vs.
temperature?
I had some trouble in that, playing around with a LPRO101.
It seems that a good voltage reference, a pair of high-precision resistor
at the ends of the multiturn pot to reduce the voltage span, end a good
multiturn pot, was not so good….
I do not know what was wrong with that….
Anyway a lot of fun!  :-)
BR
Luca
Iw2lje


Il giorno mar 31 mag 2022 alle 18:35 Gianni Pastorino via time-nuts <
time-nuts at lists.febo.com> ha scritto:

> And a heatsink, which I cut, taken from an inverter. I made the dimensions
> of the Efratom.
>
> Regard.  Gianni
> Iz1DFI
>
> Il Mar 31 Mag 2022, 14:58 paul swed <paulswedb at gmail.com> ha scritto:
>
> > Welcome to time-nuts Pastorino. Very nice reuse of some box.
> > A question how big is the heat sink on the Eftratom?
> > Or is it what came with the unit?
> > Regards
> > Paul
> > WB8TSL
> >
> > On Tue, May 31, 2022 at 1:42 AM Pastorino G. via time-nuts <
> > time-nuts at lists.febo.com> wrote:
> >
> >> Hello, this is my first post, the construction of Rubidium is going on.
> >> Here are some photos.  Efratom LPRO.
> >>
> >> Gianni
> >> _______________________________________________
> >> time-nuts mailing list -- time-nuts at lists.febo.com
> >> To unsubscribe send an email to time-nuts-leave at lists.febo.com
> >
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>