[time-nuts] Re: M100-2
Dana Whitlow
k8yumdoober at gmail.com
Mon May 8 23:21:57 UTC 2023
Some early suggestions:
1. Does it show any RF output? Of course, this alone is
not meaningful if by design it does not turn on the output
prior to establishing lock.
2. Does the current consumption vary in a manner suggestive
that the oven is working? That is, does the current start
much higher than normal operating current and dribble off
to about normal over about the normal warmup period?
I've got two aging Rb's and I live in terror that one or both will
expire before I do.
Dana K8YUM
On Mon, May 8, 2023 at 5:54â¯PM Herbert Diensthuber via time-nuts <
time-nuts at lists.febo.com> wrote:
> Hi all
> i am having a Ball Efratom M100-2 that stopped working. i am asking for
> advice what to look in general for?
> The unit in question started to take more than 6 1/2 minutes to achieve
> lock!
> Normally this would be less than 5 minutes! To be more precise it usually
> took about 3 1/2 minutes to achieve lock!
> Maybe someone with more experience can guide me?
> thank you very much
> Herbert
>
> Sent from my iPhone
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>
More information about the Time-nuts_lists.febo.com
mailing list