[time-nuts] Re: Varian V-4700A Rubidium Standard

[Jeff Huselid]

The manual must be even more rare than the unit. You are lucky to get a copy, wonder how many were made? I think there were 2 versions, with different lamp drivers.

I also had a couple of 4720’s, used them for several years.


Best regards,
Jeff Huselid
Valley Communication Engineering
3145 South De Wolf Avenue
Fresno, CA 93725
Phone 559 268 3311

Dun & Bradstreet DUNS 36-334-2460
Precision Services Since 1977

ITAR COMPLIANCE ALERT 

The information contained in this message may be subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulation (EAR) Controls, and may not be disclosed to any foreign person or firm, including foreign persons employed by or associated with your firm, without first complying with all requirements of the ITAR, 22 CFR 120-130 and the EAR, 15 CFR 730-774, including the requirement for obtaining an export license if applicable.

From: Chris Quayle via time-nuts
Sent: Saturday, October 7, 2023 11:13 AM
To: time-nuts at lists.febo.com
Cc: Chris Quayle
Subject: [time-nuts] Re: Varian V-4700A Rubidium Standard


Jeff,

Thanks. Corby got in touch offline and kindly offered to send me
a copy of the manual, now on it's way to me. Will scan and upload
to the usual sites on receipt. Looks like it has all the info
needed to restore it, so long as there is no serious corrosion
inside the modules.

Great winter project, if it cxn be lifted onto the bench :-)...

Chris
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe send an email to time-nuts-leave at lists.febo.com