No subject

To "Discussion of precise time and frequency measurement" 
<time-nuts at lists.febo.com>
Cc "Matt Huszagh" <huszaghmatt at gmail.com>
Date 9/21/2023 1:44:36 PM
Subject [time-nuts] HP 5065A power connector (Amphenol MS-3106A-18-22S) 
change?

>I ordered an Amphenol MS-3106A-18-22S power connector for use with an HP
>5065A (I think this connector is also used for the
>5061A/B). Unfortunately, the location of the slot relative to the pins
>differs on the new version versus the old one (see attached image). Note
>that the new connector shows 18-22 instead of 18-22S. However, I ordered
>a 22S and the retaining nut has 22S printed on it.
>
>Has anyone encountered this issue? Did Amphenol change the specs of this
>part? Or, did I order the wrong part? If so, what's the correct part to
>order? Is there perhaps a way to rotate the insert so the relative
>position of the connection pins and slot is the same as before?
>
>FYI I ordered from this link:
>
>https://www.arrow.com/en/products/ms3106a18-22s/amphenol
>
>Thanks,
>Matt
>