[time-nuts] Re: HP-10811B thermal fuse

[Taka Kamiya]

I seem to recall HP's official recommendation is to remove the fuse and substitute it with a simple jumper.  I think there is a bulletin for this.  (which I cannot find now)
--------------------------------------- 
(Mr.) Taka Kamiya

 

    On Saturday, January 20, 2024 at 01:19:58 AM EST, John or Susan via time-nuts <time-nuts at lists.febo.com> wrote:  
 
 The thermal fuse in my 10811B oscillator has opened. Troubleshooting 
results say that the oven is ok, but I do need to replace the fuse and 
cannot find any information about it. The manual says the Mfg. number 
was 2110-0617, and the HP part number was 10811-80008. I am guessing 
something on the order of either 1/2 A slow-blow or 1 A regular fuse. 
Can anyone provide any guidance as to the proper fuse? Also any thoughts 
as to why it failed would be appreciated. It is part of a home-brew 
GPSDO, mounted in a case right next to ventilation slots.

John W2TX
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe send an email to time-nuts-leave at lists.febo.com