[time-nuts] Re: Synergy SSR receiver in the Symmetricom 58503B

[Eric Garner]

Does this mean these modules are close to being available for purchase?


Eric


On Wed, Jan 24, 2024, 3:16 PM Art Sepin via time-nuts <
time-nuts at lists.febo.com> wrote:

> All,
>
> Thanks to Greg for loaning us his HP 58503B for testing which also showed
> an improvement in good improvement ADEV over the original Motorola UT+
> (attached).
>
> Art
>
> -----Original Message-----
> From: Gregory Beat via time-nuts <time-nuts at lists.febo.com>
> Sent: Wednesday, January 24, 2024 6:47 AM
> To: time-nuts at lists.febo.com
> Cc: Gregory Beat <w9gb at icloud.com>
> Subject: [time-nuts] Synergy SSR receiver in the Symmetricom 58503B
>
> Synergy's single-board, u-Blox based, SSR Series replacement receiver (for
> Motorola VP, UT receivers)
>
> https://synergy-gps.com/wp-content/uploads/2022/05/SSR-VP_UT-Single-Board-Datasheet-062922.pdf
> has been sucessfully tested with the Symmetricom 58503B GPS Time and
> Frequency Reference Receiver.
>
> https://avalontest.com/images/uploaded/Agilent-58503B-Specifications-B96FB.pdf
>
> My 58503B currently running the Synergy SSR on my electronics bench. The
> replacement receiver does "Lock" faster, than the original Motorola unit.
> The GPS "reported date" is now correct (WNRO resolution), without internal
> program adjustment.
>
> greg
> w9gb
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com To unsubscribe send an
> email to time-nuts-leave at lists.febo.com
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com