No subject

alibration and requiring expensive "repair" I'd buy the Agilent.=20

Robert G8RPI.

--- On Sun, 3/10/10, Daniel Mendes <dmendesf at gmail.com> wrote:

From: Daniel Mendes <dmendesf at gmail.com>
Subject: Re: [volt-nuts] Help choosing DVM
To: "Discussion of precise voltage measurement" <volt-nuts at febo.com>
Date: Sunday, 3 October, 2010, 4:55


Thanks very much for your help. The model 2010 costs half than the 2001.=20
I discovered that I can buy an agilent 34420A for about the same price=20
than a Keithley 2010. Any hints about that?

Em 28/9/2010 01:08, Laurence Motteram escreveu:
> "It is the best DVM ever produced",
>
> Some might say that the Fluke 8508A and Datron 1271 and 1281 at least giv=
e the HP3458A fair competition.
>
> If you are looking at the Keithley DMMs, you might consider the model 201=
0.=A0 It is as good as the 2001 for DC Volts, but much cheaper.
>
> Regards,
>
> Laurence Motteram
>
> -----Original Message-----
> From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On B=
ehalf Of Mark Sims
> Sent: Tuesday, 28 September 2010 1:33 PM
> To: volt-nuts at febo.com
> Subject: [volt-nuts] Help choosing DVM
>
>
> Why would you want to use ANY of those DVMs?=A0 With just a little patien=
ce you can buy an 8.5 digit HP3458A on Ebay for under $3000.=A0 It is the b=
est DVM ever produced,=A0 and likely ever will be produced.=A0 The design i=
s over 25 years old,=A0 and is at the limit of what can be achieved by sili=
con based technology.=A0=20
> For under $200 you can easily score an HP 3457A which is 6.5-7.5 digits. =
=A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0 =A0=A0=A0=A0=A0=A0 =A0=A0=A0=20
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-=
nuts
> and follow the instructions there.
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-=
nuts
> and follow the instructions there.
>


_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nu=
ts
and follow the instructions there.
=0A=0A=0A