[volt-nuts] Solartron 7081 Test Leads

[Fred]

I think these work pretty well too, glue some coppersheet between the
jaws. Solder the wires to the copper (befor glueing ;-) ) And you have a
nice and cheap Kelvin clip. They are also available in childerens size
so you can make a SMD version too :-)
See the link, because I do not know the english word. (you use them to
clip laundry to the line when it hangs to dry)

http://www.canstockphoto.nl/beelden-foto's/wasknijper.html#file_view.php?id=5418467

Fred


Mark Sims schreef op do 04-08-2011 om 12:04 [+0000]:
> For the Kelvin clips,  your best bet is a set of HP kelvin clips (I forget the part number...  they run around 200 bucks).  They use the old ESI style clips that use rubber o-rings as springs to close the clips.
> Next best is Ebay Chinese clips...  they have a metal spring that can add some capacitance that affects high freq AC measurements.  They are only a few dollars and actually work pretty well.   		 	   		  
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.