[volt-nuts] HP3468A

[Bob Smither]

Roy Phillips wrote:
> Bob
> Is it possible that this  has been left in the "calibrate" mode ?   I 
> seem to remember that there is a DIL switch at the rear (number 8), for 
> this purpose. This is of course an instrument that is equipped with 
> HP-IL, which makes it a little less attractive, but otherwise a very 
> well made DVM. Good luck.

Thanks for the tip.  I have tried both positions of the calibrate enable 
switch - unfortunately no change :-(.

-- 
==========================================================================
Bob Smither   Office: (281)331-2744   Fax: (281)331-4616   Bob at Smither.net
http://www.tx.lp.org                                     LPT WebMaintainer
==========================================================================
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smither.vcf
Type: text/x-vcard
Size: 140 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/volt-nuts/attachments/20110829/59efbf80/attachment.vcf>