[volt-nuts] Reference Calibration Options - Solartron 7081andFluke 731B and 335A

[gbusg]

Charles,

What are the 1year 10Vdc specs for the 731B vs 7081?

Thanks,
Greg


----- Original Message ----- 
From: "Charles P. Steinmetz" <charles_steinmetz at lavabit.com>
To: "Discussion of precise voltage measurement" <volt-nuts at febo.com>
Sent: Friday, September 09, 2011 9:09 PM
Subject: Re: [volt-nuts] Reference Calibration Options - Solartron 
7081andFluke 731B and 335A


Joe wrote:

>Pending all the above, I may then send one of the 731B's in for an
>'official' Fluke calibration to act as a verification of the 7081.

As several of us have noted, the 731s should be the most stable of
the bunch, because that is precisely what they were designed for.  It
only makes sense to have a traceable calibration on your most stable
standard -- that gives you the best chance of accurately riding herd
on the others.

Best regards,

Charles






_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.